Series 100 Anti-Slip Safety Stair Nosings For New Stairs
If you are replacing existing embedded nosings or need to butt up to tile or carpet, Amstep 100 series is the stair nosing to use.
Amstep 100 Series contains super hard abrasives locked into an aircraft grade aluminum base for long life. Easy to install they will be drilled and countersunk for fasteners and can be used in wood, metal and masonry stairs. They come in widths from 1 3/8” to 4” and eight standard colors with custom colors available. Glowline and Sightline are also available in all the 100 Series Stair Nosings.
The tread base shall consist of heat treated 6063-T6 Amstep Products, LLC extruded aluminum. The abrasive filler material shall be bonded and locked into the channels provided in the extruded tread base. Treads will have a coefficient of friction 1.02 dry, 0.98 wet per ASTM F609-79.


- 1 3/8″ wide
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick

- 1 7/8″ wide
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick, Lip 1/4″ from underside

- 3″ wide
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick, Lip 1/4″ from underside

- 3″ wide
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick, Lip 1 1/8″ from underside

- 3″ wide, for sloped pan and risers
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick, Lip 1 1/8″ from underside

- 4″ wide
- For poured or precast concrete, wood stairs and steel pan cement-filled stairs
- Tread 1/4″ thick, Lip 1/4″ from underside
